Compressed Sheets
Products |
Characteristics and Uses |
Compress-ibility % @ 35.5 MP's (5000 psi) |
Compress-ibility % @ 6.89 MP's (1000 psi) |
Minimum Recovery % |
Tensile Strength Minimum % |
ASTM Oil No.
|
3ASTM Fuel B
|
Distilled Water
|
|||||||||
|
Branded Vellumoid
|
Treated cellulose fiber material impregnated with a protein glue and glycerin binder General purpose gasket material. Service temperatures up to 250°F.UL listed.
|
|
25-40
|
40
|
2000
|
5
|
15
|
5
|
15
|
30
|
90
|
||||||
|
505 Fiber
|
Economical treated fiber material impregnated with a protein and glycerin binder. Service in moderate duty applications at temperatures up to 250° F.
|
|
25-40
|
40
|
2000
|
5
|
15
|
5
|
15
|
30
|
90
|
||||||
|
Velbuna WG-5
|
A nitrile rubber and cellulose fiber high density beater addition material. Highly resistant to oils, fuels,greases,water and coolants. WG-5 demonstrates maximum resistance to heat aging at service temperatures up to 300° F.
|
|
10-20
|
60
|
3000
|
10
|
35
|
15
|
35
|
45
|
45
|
||||||
|
Velbuna WG-25
|
A blended rubber and cellulose fiber medium density beater addition material. Demonstrates good resistance to oils, water coolants and salt solutions. at service temperatures up to 300° F.
|
|
15-30
|
40
|
1700
|
10
|
65
|
15
|
65
|
40
|
80
|
||||||
|
Velbuna WG-57-G
|
An economical low density cellulose and styrene butadiene rubber beater addition material. WG-57-G is a tough, versatile material intended for applications where a low cost beater addition type material is indicated at service temperatures up to 350° F.
|
|
15-35
|
35
|
1500
|
15
|
70
|
15
|
70
|
55
|
80
|
||||||
|
Vellutherm 600
|
A nonasbestos beater addition material designed to function as a high swell gasket material when exposed to petroleum oils and fuels. Vellutherm 600 is formulated with a special blend of elastomers to provide an optimum balance of properties at service temperatures up to 350° F.
|
15-30
|
|
22
|
800
|
10-25
|
|
10-40
|
|
|
|
||||||
|
Vellutherm 611
|
A nonasbestos beater addition material consisting of a unique blend of fibers and other components with a cured nitrile rubber binder. Vellutherm 611 demonstrates high compressive strength and excellent dimensional stability under varying ambient humidities at service temperatures up to 350° F.
|
10 - 20
|
|
50
|
2000
|
10
|
30
|
15
|
30
|
|
|
||||||
|
Vellutherm 650
|
A nonasbestos beater addition material consisting of blended fibers with a cured nitrile binder. Vellutherm 650 is an economical medium density material for use in general automotive and industrial applications at service temperatures up to 350° F.
|
30 max.
|
|
25
|
1200
|
10
|
|
15
|
35
|
40.0
|
60.0
|
||||||
|
Bucote
|
Bucote is a hard, highly densified fiber material with a nitrile rubber coating on both sides. Bucote is designed for use in rigid flange applications when spacing of component parts is critical.
|
|
3 - 10
|
50
|
3500
|
|
|
|
|
|
|
||||||
|
Velcar B-10
|
Velcar is a treated fiber base material with a nitrile rubber coating on both sides. Velcar is highly resistant to oils, gasoline, diesel and heating fuels at temperatures up to 250° F.
|
|
25 - 40
|
40
|
1500
|
5
|
10
|
15
|
10
|
30
|
75
|
||||||
|
Nicote
|
Nicote is a specially designed material designed for difficult sealing applications. Nicote approaches the sealing qualities of rubber, but has true compressibility. Nicote is composed of a rubber treated cellulose fiber base with a nitrile rubber coating on both sides. It demonstrates excellent resistance to gasoline, fuel oils, water and a number of solvents at service temperatures up to 300° F.
|
|
25 - 40
|
40
|
1000
|
10
|
45
|
25
|
65
|
20
|
40
|
||||||
For further specifications please call (201) 635-1910